當前位置：蘇州君思儀器科技有限公司>>實驗室常用儀器>>純水機>>Milli-Q Integral 純水系統

Milli-Q Integral 純水系統

返回列表頁

參考價

面議

具體成交價以合同協議為準

產品型號Milli-Q Integral 純水系統

品牌

廠商性質其他

所在地蘇州市

在線詢價收藏產品

聯系方式：查看聯系方式

更新時間：2025-07-25 19:45:01瀏覽次數：71次

聯系我時，請告知來自食品機械設備網

產品分類 品牌分類

暫無信息

蘇州君思儀器科技有限公司

經營模式：其他

商鋪產品：230條

所在地區：

詢價 給他留言

產品簡介

概述Milli-Q® Integral is a unique combination of optimized water purification and monitoring technologies. It allows, in a single device, both pure (Type 2) and ultrapure (Type 1) water to be produced directly from potable water. This all-in-one concept offers several benefits:Provides users with complete control over all water purification steps and the final water quality. Allows installation of a comprehensive water purification chain in a minimal amount of space. Eliminates the constraints of centralized wat

詳細介紹

規格

Water Specifications

Milli-Q® Integral ultrapure water (Type 1)

Resistivity at 25 °C1	18.2 MΩ?cm
TOC2	≤ 5 ppb
Particulates (size > 0.22 μm)3	< 1 particulate/mL
Bacteria3,4	< 0.01 CFU/mL
Pyrogens (endotoxins)4	< 0.001 EU/mL
RNases4	< 1 pg/mL
DNases4	< 5 pg/mL
Flow Rate	Up to 2 L/min
1resistivity can also be displayed non-temperature-compensated as required by USP 2in the appropriate test conditions 3with Millipak® final filter 4with Biopak® polisher These values are typical and may vary depending on the nature and concentration of contaminants in the feed water.

Milli-Q® Integral pure water (Type 2)

Resistivity at 25 °C1	Typically 10-15 MΩ?cm
TOC	< 30 ppb
Production flow Rate	3 L/h (Milli-Q® Integral 3) 5 L/h (Milli-Q® Integral 5) 10 L/h (Milli-Q® Integral 10) 15 L/h (Milli-Q® Integral 15)
From an E-POD® dispenser with final filter, the following water quality specifications are achieved:
Particulates (size > 0.22 µm)2	< 1 particulate/mL
Bacteria2,3	< 0.1 CFU/mL
Pyrogens (endotoxins)3	< 0.001 EU/mL
RNases3	< 0.01 ng/mL
DNases3	< 4 pg/µL
Flow Rate	Up to 2 L/min
1Resistivity can also be displayed non-temperature-compensated as required by USP 2with Millipak® final filter 3with Biopak® Polisher

Feed water

Feed water quality	Potable tap water as described in US-EPA, EP and WHO norms
Feed water connection	?" Gaz M
Feed water pressure*	1 - 6 bar
Feed water temperature	5 - 35 °C
* For pressure above 6 bar, a pressure regulator needs to be installed upstream of the system

System Specifications

Production unit

Dimensions (H x W x D)	500 x 332 x 484 mm (19.7 x 13.0 x 19.0 in)
Operating weight	24 - 28 kg (52.9 - 61.7 lb)
Electric power supply voltage	100 - 230 V +/- 10%
Electric power supply frequency	50 - 60 Hz +/- 10%
Milli-Q® Integral main unit data connection	Ethernet (RJ45)

Q-POD® & E-POD® dispensers

Dimensions (H x D)	579 x 230 mm (22.8 x 9.0 in)
Operating weight	4.7 kg (12.1 lb)
Dispenser tubing length	0.8 m (31.5 in)
Distance from production unit to Q-POD®	2.9 m (9.5 ft)
Electric power cable length	2.9 m (9.5 ft)
Q-POD® data connection	Parallel port (25-pin D-Sub)